System Accessories

DAMS D6050 Series

PDF IconView x000 Series datasheet
Positioner Specifications
Frequency Ranges DC to 6 GHz (DAMS D6050-6)
DC to 18 GHz (DAMS D6050-18)
DC to 40 GHz (DAMS D6050-40)
DC-50 GHz(DAMS D6050-50)
Cable Interface Ultra high-quality cable with SMA connectors
Ultra-precision, low-noise rotary joint with SMA connectors
("K" connectors on DAMS D6040)
Platform Movement Horizontal 1.8º precision stepper motor with worm gear drive
Up to .02º Turntable (Elevation) resolution
Up to .025º Roll (Azimuth) resolution
360º azimuth range
± 180º elevation range
Weight Capacity 10 lbs. maximum @ level position (DAMS 5000)
20 lbs. maximum @ level position (DAMS 6000/7000)
(capacity decreases with angle)
Platform Control Interface USB 1.1 (RS232 available upon request)
Special Options
(included w/ DAMS 6000/7000)
Acrylic or aluminum thrust plate (additional cost may apply)
Digital level for precise setup
Ultra-high resolution option
Positioning laser for long range alignment
Vertical alignment tool
+/- 90 degree pivot for spherical measurements
DAMS Software Studio Pro
Advanced processing module
Up to 3-year warranty on parts and labor (all x000 systems)
Technical support (all x000 systems)
Analyzer Control Interface GPIB controller card (not included)
Platform Max Speed 120º per minute (vertical)
30 R.P.M. maximum azimuth
Positioner Mounting Velbon tripod with fluid pan head
Horizontal or vertical, standard 1/4-20 tripod threads
Positioner Composition 85% acrylic and Delrin® construction for limited reflection
Environmental Conditions Operating temp: 0° C to 45° C (32° F to 104° F)
No condensation
Transport temp: -40° C to 60° C (-40° F to 140° F)
10% to 90% relative humidity
No condensation within 72 hours
Power Requirements +24 vDC (3.0A) center pin + on connector
Positioner Dimensions 12 inches (30.5 cm) wide
5 inches (12.5 cm) tall WITHOUT vertical movement assembly
14 inches (35.6 cm) tall WITH vertical movement assembly
Positioner Weight 5 pounds (2.27 kg)
Width 12" (30.5 cm) without tripod
Height 5" (12.5 cm) without vertical movement assembly or tripod
35" (88.9 cm) minimum or 70" maximum (177.8 cm) with vertical movement assembly and tripod
Tripod Composition Aluminum and plastic

System Features

DAMS D6050 Series

Medium Sized Antennas


All DAMS D6050 Series systems features:

  • Robust Components
  • Professionally machined parts
  • Precision calibrated RF cables
  • Precision rotary joints
  • Feature-packed software
  • Detailed, full-color users manual
  • Full technical support
  • Parts and labor warranty


Model Features

  D6050 Series

Frequency Range
Up to 50GHz Coax and 110 GHz Waveguide

Movement Range

Azimuth: 0-360º or +/- 180
Elevation: 0-360º or +/- 180


Resolution

Azimuth: .02º (.01 half-step)
Elevation: .02º (.01 half-step)


Weight Capacity

Roll Axis: 25 Lbs.

Turntable: 150 Lbs


Included Cables
Two 15' ULTRA-Low-loss SMA Cables

Rotary Joint
Precision rotary joints in both axis

Included Software
DAMS Antenna Measurement Studio Pro

Spherical Plotting Module
Included

Included Accessories
All Accessories

Warranty
Full 3 year Warranty

Detailed Specifications

DAMS D6050 Series

PDF IconView x000 Series datasheet
Positioner Specifications
Frequency Ranges DC to 6 GHz (DAMS D6050-6)
DC to 18 GHz (DAMS D6050-18)
DC to 40 GHz (DAMS D6050-40)
DC-50 GHz(DAMS D6050-50)
Cable Interface Ultra high-quality cable with SMA connectors
Ultra-precision, low-noise rotary joint with SMA connectors
("K" connectors on DAMS D6040)
Platform Movement Horizontal 1.8º precision stepper motor with worm gear drive
Up to .02º Turntable (Elevation) resolution
Up to .025º Roll (Azimuth) resolution
360º azimuth range
± 180º elevation range
Weight Capacity 10 lbs. maximum @ level position (DAMS 5000)
20 lbs. maximum @ level position (DAMS 6000/7000)
(capacity decreases with angle)
Platform Control Interface USB 1.1 (RS232 available upon request)
Special Options
(included w/ DAMS 6000/7000)
Acrylic or aluminum thrust plate (additional cost may apply)
Digital level for precise setup
Ultra-high resolution option
Positioning laser for long range alignment
Vertical alignment tool
+/- 90 degree pivot for spherical measurements
DAMS Software Studio Pro
Advanced processing module
Up to 3-year warranty on parts and labor (all x000 systems)
Technical support (all x000 systems)
Analyzer Control Interface GPIB controller card (not included)
Platform Max Speed 120º per minute (vertical)
30 R.P.M. maximum azimuth
Positioner Mounting Velbon tripod with fluid pan head
Horizontal or vertical, standard 1/4-20 tripod threads
Positioner Composition 85% acrylic and Delrin® construction for limited reflection
Environmental Conditions Operating temp: 0° C to 45° C (32° F to 104° F)
No condensation
Transport temp: -40° C to 60° C (-40° F to 140° F)
10% to 90% relative humidity
No condensation within 72 hours
Power Requirements +24 vDC (3.0A) center pin + on connector
Positioner Dimensions 12 inches (30.5 cm) wide
5 inches (12.5 cm) tall WITHOUT vertical movement assembly
14 inches (35.6 cm) tall WITH vertical movement assembly
Positioner Weight 5 pounds (2.27 kg)
Width 12" (30.5 cm) without tripod
Height 5" (12.5 cm) without vertical movement assembly or tripod
35" (88.9 cm) minimum or 70" maximum (177.8 cm) with vertical movement assembly and tripod
Tripod Composition Aluminum and plastic

D6050 Series Antenna Measurement Systems

 

D6050 Multi-Axis floor mount antenna measurement system

Configurable Up to 5 Axis 50 GHz / mmW Waveguide

d6050.jpg


System Includes:

  • High-resolution floor mount positioner
  • 3D Spherical measurements
  • Precision Z axis slider for precise AUT centering
  • Includes DAMS Antenna Measurement Studio Pro
  • 5 Axis option for automated phase center Measurement

eda.jpg


Model Frequency Price
D6050-6 DC-6 GHz Request Quote
D6050-18 DC-18 GHz Request Quote
D6050-40 DC-40 GHz Request Quote
D6050-50 DC-50 GHz Request Quote
D6050-mmW-CFX

mmW Waveguide

Request Quote
 

PDF IconD6050 Series Datasheet


All Features
Detailed Specs
Accessories